WHY IS SECURITY LOCK FOR VAN SO FAMOUS?

Why Is Security Lock For Van So Famous?

Why Is Security Lock For Van So Famous?

Blog Article

Choosing the Right Security Lock For Your Van

Choosing the right security lock for your van will help to deter thieves and safeguard your cargo. Some locks are made for DIY installation, but others may require professional help to ensure that they are properly installed and provide the best protection.

Slam locks are perfect for couriers who make multiple deliveries. They automatically lock when the door is shut. Deadlocks are used in conjunction with the lock you purchased from the manufacturer and offer an additional layer of security.

Deadlocks

Van dead locks are a further physical security measure that provides an effective deterrent for criminals. These aftermarket locks are specialized and extend through the door of the van. They connect to the frame, so they cannot be opened without the use of a key. These locks are particularly useful for vans that must be kept for a long period of time, or are carrying expensive equipment.

They're perfect for people who prefer the remote locking system of the factory during the day but wish to add an extra layer of security at night or if they feel their vehicle is in a hazard area. When a key is used to operate them the bolt is thrown into a receiver attached to the opposite body section of the vehicle. This provides an extra layer of security above the locks that are factory installed.

These locks are not automatic locks like the Slam Locks and Hook Locks that we also sell on the internet. They have to be manually operated by the driver using the key supplied. Straight bar locks can be used on the rear of doors as well as twin sliding doors, whereas the hook lock is ideal for the front and rear doors of medium to small vans.

Both are designed to prevent an intruder from attacking the lock and forcing it to open the lock, which could allow them access to the van's cab area or loading area. They're specifically designed for each van model and are located in the best place to provide an extra layer of protection against specific attack techniques.

The repercussions of van theft could be significant, particularly for professionals such as contractors and tradesmen who rely on vehicles to transport vital tools and equipment they cannot afford to lose. It can cost money to replace stolen goods, but it could cause loss of income due to unplanned downtime or the hassle of finding a different transportation option. Installing a top-quality van lock can help to secure your possessions and deter thieves while reducing the risk of loss and may help you save money on insurance cost.

Hook Locks

A hook lock for vans is a great theft deterrent that fits on the door of your vehicle. It is independent of the lock on the vehicle and can only be opened by the driver using keys. It features a hook-shaped lock that cannot be opened by force. It is constructed from top-quality materials. It is also extremely resistant to drilling and manipulation. Sold Secure is the UK's most trusted security testing body. Many models have been developed to meet police specifications and are endorsed by Sold Secure.

Consider how much protection your van needs before purchasing the security lock. For instance, if transport expensive tools or delicate cargo, a more advanced lock, such as deadlock or slam is more appropriate. On the other the other hand, if you're carrying items of lesser value, a basic lock like a slam could suffice. It is also advisable to review your insurance policy to be sure that the addition of additional locking mechanisms will not cause it to be cancelled.

When you are choosing a security lock system, you should also be aware of its weather resistance. Your locks must be able to withstand various weather conditions, since vans are always exposed to the elements. Therefore, they won't lose their effectiveness or become more susceptible to being manipulated by thieves. Additionally, you should ensure that you are up-to-date with software updates for electronic locking systems in order to guard against security issues and improve their effectiveness.

It is also important to select the lock that is simple to install. Certain models are designed for DIY installation, whereas others require professional installation services to ensure that they're installed correctly and function in the way they were intended to. Your skill level, your confidence, and the resources you have available will determine whether or not an expert is required to install the product.

Catalytic Converter Locks

Catalytic converters can reduce harmful emissions from your car. However, this vital part is also a target for thieves because of the precious metals that it contains. The black market value of these precious materials has led to a rise in the amount of stolen converters. There are preventive measures to tackle this issue.

Many people assume that a basic security system will suffice but they're not as effective than a device designed specifically to safeguard your converter. These devices are designed to detect heat or vibrations, and then emit a loud noise to deter thieves. These devices are more similar to deterrents than protection systems and they tend to cost more than standard locks.

The Cat Clamp converter lock, an exclusive design, is an established and tested method to stop the theft of catalytic converts. The device is constructed of stainless steel cable which runs around the converter and the frame of the vehicle. The cable is wrapped up to seven times and secured which makes it difficult for thieves remove the converter. The unit can be put in place in less than 30 minutes and does not require drilling or welding. It is simple to install on a variety of check here vehicles and is suitable for use on cars, trucks, SUVs, vans, and other vehicles that have a catalytic converter.

Another option for securing your catalytic converter is a metal plate that completely covers the unit. It is not as easy as installing a metal cage but it makes the converter harder to steal. These plates can cost anywhere between $150 and $270 depending on the model.

It is important to remember that no security system is perfect, but preventive measures can greatly reduce the chances of theft. It is crucial to take the time to secure your vehicle properly. This will keep you and your belongings safe and can save you money on the replacement of expensive components. It is a good idea to have your catalytic convert marked with your VIN number, as this will make it easier to identify the unit in the event that it is found and resold.

Anti-Peel Kits

Created to protect against the popular "Peel and steal" method, this solution is installed on the front edge of the vehicle's side load door. This improves the resistance of the door to 'peel-and steal' attacks by up to 300 percent. Using the L4V Anti-Peel Kit in conjunction with a hook that is high-positioned lock dramatically reduces the possibility of thieves being able to gain entry into your van via its side load door.

With the latest and most brash methods of van theft and crime increasing, it is imperative that additional van security is utilized. One of the latest techniques is known as "peel and steal," and consists of thieves stealing items and tools from vans in seconds by applying pressure to the doors with their knees, then pulling, bending and prising them open to reveal the contents of the area. This kind of thief is becoming commonplace, and has cost UK tradespeople thousands of pounds worth of equipment and stock.

Locks 4 Vans has launched a new high hook lock and an anti peel kit that was specifically designed to tackle this ever-growing problem. The Anti-Peel Kit, fitted to your Ford Custom's barn door reduces the chance of 'peel and steal attacks by securing the door's skin and putting in a second layer of protection. The high L4V hook locks are built into the barn door to help strengthen the door and secure it if the anti-peel plate was removed.

Our range of anti-peel kits are available to buy on the internet and delivered directly to your vehicle in only a few days. Our skilled engineers will install the items for you. We have installers in Greater Manchester and Tameside so can offer our services in areas like Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.

Please contact us if you want to learn more about improving the security of van. We provide a variety of options to increase the security of your van. These include deadlocks, armour locks and shielding to stop puncture attacks.

Report this page